CP as Customized Product. The most advanced product in terms of possibilities
Availability
| Maintainability | The easiest on the market with total components front access |
| Reliability | Innovative internal temperature reduction, through dual redundant cooling channels Multiplied redundancy with Chloride® Patented Smart Parallel Switching function that dynamically controls paralleled systems |
Key advantages
User friendly | Large color touch screen with 2000-event exportable log One of the best on the Industrial UPS Market |
USB access | Export of all the recorded events using USB flash drive. Memorization of complete electronic settings for future maintenance needs |
Batteries compatibility | Innovative full integration with SMC/Salt Batteries (Sodium Metal Chloride Batteries) Full compatibility with Lead-acid, nickel-cadmium batteries, sealed or vented and Lithium-Ion |
Life time | Designed for 20+ years of continuous operation with appropriate maintenance plan |
Input
DC voltage | 110-120 V 220-240 V 400 V |
Input voltage range | 88-156 V 176-305 V296-507 V |
Output
AC voltage Single-phase | 1 x 230 V (220, 240) ; 1 x 110 V (115, 120) |
AC voltage Three-phase | 3 x 400 V (380, 415) ; 3 x 220 V (200, 208, 230) |
Frequency | 50 Hz (60 Hz) |
Frequency stability With internal oscillator | +/- 0.05 % |
With reserve synchronism | +/- 3 % (from 1 to 5 % adjustable) |
Voltage stability (for 0 to 100 % load variation) Static | +/-1 % (+/-2 % for parallel systems) |
Dynamic | VFI SS 111 as per IEC/EN 62040-3, class 1 |
Inverter overload capability 1 minute | 150 % of nominal power |
Inverter overload capability 10 minutes | 125 % of nominal power |
Short-circuit clearance (in % of nominal current) | 1-ph output : 250 % / 100ms – 175% / 5s |
3-ph output Ph-N: | 315 % / 100 ms – 220 % / 5 s |
3-ph output Ph-Ph: | 190 % / 100 ms – 135 % / 5 s |
Harmonic voltage distorsion | With 100 % linear load < 3 % |
Harmonic voltage distorsion | With 100 % non-linear load : SS as per IEC/EN 62040-3 |
Allowable power factor | 0,5 lagging to 0,5 leading |
General data
Operating temperature | 0 to 40 °C (-20°…55°C on request) |
Storage temperature | -20 to +70 °C |
Relative humidity | < 95 % non condensing |
Operating altitude | 1000 m max without derating |
Cooling | Forced ventilation |
| Efficiency | Up to 91 % according to rating |
External protection | IP 20 according to IEC 60529 |
Internal protection | Protection against unintentional direct contacts, as per IEC 60950-1 |
Noise (at 1m in front of the unit) | 60-75 dB according to rating |
Cabinet color | Grey RAL 7032 |
Dimensions | Varying according to ratings and options |
Ratings
Output power (kVA) | 5 to 500 |
DC Input voltage (Vdc) | 110-220 220-240 400 |
Options
Inverter | Input isolation transformer Automatic precharge of capacitors Onther output voltage (1 x 110 to 3 x 690 VAC) Inverter oversizing |
By pass line | Bypass isolator(s) Bypass transformer (H class) Bypass stabilizer (servo-controlled) Backfeed protection |
| System | Inverter with or with bypass line Parallel configurations Input / output isolators AC Distribution Earth fault detection or monitoring Internal lighting Anti-condensation heater Cabinet temperature monitor |
| Mechanical | External ingress protection up to IP42 Top cable entry Specified color of panels Special feet height (200mm or 300mm) Special keylock Non-magnetic gland plate (brass or aluminum) Lifting eyes 2 mm side panels thickness Specified cabinet identification (tag, nameplate) Anti-seismic design |
Communication | Front panel analogue meters(72×72, class 1.5 or class 1) Transducers 4-20mA Additional volt-free contacts Modbus RTU (RS232 or RS485) Modbus / TCP Profibus IEC61850 protocol PPVis monitoring software Mimic panel on front:• Passive mimic of the system• Active mimic with integrated LEDs Lamp indicator on front panel (22 mm diameter) |
Standards
IEC62040-1:2008+AMD1:2013 IEC62040-2:2006 IEC62040-3:2011 IEC61439-1:2011 IEC60529:1989+AMD1:1999 IEC60076-11:2004 |
