Chloride® CP70Z AC UPS

CP as Customized Product. The most advanced product in terms of possibilities .

Features & Benefits

Technical Specification

Features & Benefits

Technical Specification

Brochures and Data-Sheets

DATASHEET CP70Z EN IEC

DATASHEET CP70Z EN UL

DATASHEET CP70Z SP IEC

Contact Our Specialists

for More Information

Maintainability	The easiest on the market with total components front access
Reliability	Innovative internal temperature reduction, through dual redundant cooling channels Multiplied redundancy with Chloride® Patented Smart Parallel Switching function that dynamically controls paralleled systems

User friendly	Large color touch screen with 2000-event exportable log One of the best on the Industrial UPS Market
USB access	Export of all the recorded events using USB flash drive. Memorization of complete electronic settings for future maintenance needs
Batteries compatibility	Innovative full integration with SMC/Salt Batteries (Sodium Metal Chloride Batteries) Full compatibility with Lead-acid, nickel-cadmium batteries, sealed or vented and Lithium-Ion
Low THDi	6 – or 12-pulse thyristor rectifier Down to 5% THDI in 12-pulse SCR system with harmonic filters
Life time	Designed for 20+ years of continuous operation with appropriate maintenance plan

AC Voltage	3 X 400 V (380, 415) (other available on request)
Voltage Tolerance	+/- 10%
Frequency	50 Hz (60 Hz)
Frequency Tolerance	+/- 5%
Inrush current	≤ 10 x ln (other available on request)

AC voltage Single-phase	1 x 230 V (220, 240) ; 1 x 110 V (115, 120) (other available on request)
AC voltage Three-phase	3 x 400 V (380, 415) ; 3 x 220 V (200, 208, 230) (other available on request)
Frequency	50 Hz (60 Hz)
Frequency stability with internal oscillator	+/- 0.05 %
Frequency stability with reserve synchronism	+/- 3 % (from 1 to 5 % adjustable)
Voltage stability (for 0 to 100 % load variation) Static	+/-1 % (+/-2 % for parallel systems)
Voltage stability (for 0 to 100 % load variation) Dynamic	VFI SS 111 as per IEC/EN 62040-3, class 1
Inverter overload capability 1 minute	150 % of nominal power
Inverter overload capability 10 minutes	125 % of nominal power
Short circuit clearance (in % of nominal current) : 1-ph output	250 % / 100 ms – 175 % / 5s
Short circuit clearance (in % of nominal current) : 3-ph output Ph-N	315 % / 100 ms – 220 % / 5s
Short circuit clearance (in % of nominal current) : 3-ph output Ph-Ph	190 % / 100 ms – 135 % / 5 s
Harmonic voltage distortion: With 100% linear load	< 3%
Harmonic voltage distortion: With 100% non-linear load	SS as per IEC/EN 62040-3
Allowable power factor	0,5 lagging to 0,5 leading

Type	Salt Metal Chloride, Lead acid or nickel cadmium, vented or recombination
Autonomy	From few minutes to several hours, on request
Battery current limitation (typical, float, & boost modes)	0.1 C (lead-acid battery) / 0.2 C (nickel-cadmium battery)

Operating temperature	0 to 40 °C (-20°…55°C on request)
Storage temperature	-20 to +70 °C
Relative humidity	< 95 % non condensing
Operating altitude	1000m max without derating (other available on request)
Cooling	Forced ventilation
Efficiency	Up to 90 % according to rating
External protection	IP 20 according to IEC 60529 (other available on request)
Internal protection	Protection against unintentional direct contact, as per IEC 60590-1/62477-1
Cabinet colour	Grey RAL 7032 (other available on request)
Dimensions	Varying according to ratings and options

IEC62040-1:2017	Uninterruptible power systems (ups) – Part 1: Safety requirements
IEC62040-2:2016	Uninterruptible power systems (UPS) -Part 2: Electromagnetic compatibility (EMC) requirements
IEC62040-3:2011	Uninterruptible power systems (UPS) – Part 3: Method of specifying the performance and test requirements
IEC61439-1:2011	Low voltage switchgear and controlgear assemblies – Part 1: General rules
IEC60529:1989+AMD1:1999	Degrees of protection provided by enclosures (IP Code)
IEC60076-11:2004	Power transformers – Part11: Dry type transformers